-10%

Cutting Guide for straight blades

Original price was: 40.00€.Current price is: 36.00€. (w/o VAT 36.00)

For ideal straight and angular cuts!

The adapter for straight blades – “Cutting guide” helps cut polystyrene materials EPS, XPS evenly and at different angles. The adapter is fixed with two bolts (included) to the base of the Hot Knife cutter HWS250! and is generally used with standard straight blades Type-D20 (L = 200 mm (7.87 inches) and Type-D25 (L = 250 mm (9.84 inches).

Description

The Cutting Guide for straight blades is fitted with an adjustable guide bar with a back stop which can be easily removed from the guide and very simple angle adjuster. Cutting guider well proven at construction sites and in design workshops, for example for the cutting out of window slopes or pipe breakthrough passages or for smooth cutting of different design figures.

  • Straight and angle cuts.
  • Does not prevent the replacement of blades.
  • Auxiliary support for smooth and accurate cutting.
  • Measuring scale on the cutting guide for setting the correct size.

Overview of the Cutting Guide for straight blades.

Cutting guide for Hot Knife cutter HWS250!


| International Express delivery is carried out by TNT, UPS, DPD, Regular Post. Shipping & Delivery terms!


HWS250! Full video!

HWS250! Basic kit


Want to get in touch?
We’d love to hear from you!

Chat with us ONLINE from the corner of the page
or e-mail us: shop@hws250.com


Additional information

Weight 0.31 kg
Dimensions 30 × 12 × 7 cm
Delivery

We ship cutting units and accessories all over the world!

Availability

Cutting Guide for straight blades is available in stock

Important

When using optional accessories, always take into account the length of the blade fixed in the holders of the platforms and choose/adjust the correct blade heating cycle. To do this, follow these steps:
1) Set the step-by-step power controller to the minimum value.
2) Fix the blade to the platform holders.
3) Activate the cutter by holding down the power button (switch)
4) Touch the material with the blade.
5) Turn the step-by-step power controller until the blade starts to cut the material smoothly.
Note that it takes 3 to 5 seconds for the blade to heat to the value set on the controller.
6) When the right value is set, you can now start working.

NB! Do not use the maximum power without the need for a long time. This can lead to strong cutting blade deformation or HWS250! breakage.

You may also like…